Search Support
Did you mean:
No results found.

Suggestions:
  • Make sure all words are spelled correctly
  • Use different words that mean the same thing

Product Detail Pages

Results 1 - 10 of 34
Did you mean:
No results found.

Product Detail Pages

Results 0 - 0 of 0

Relevant Answers

Did you mean:
No results found.

Results 1 - 10 of 303 for powerforce
  1.   Follow these steps if you are experiencing issues with no power: Unplug vacuum Run hand along entire length of power cord, it should be smooth Check plug for damage Is either the cord... Answer ID: 3544
  2. Updated   Getting started with your TurboClean™ / PowerForce™ Pet XL Before assembly, ensure all of your accessories and parts are present. Note that standard accessories may vary by... Answer ID: 6970
  3. Updated   Cleaning & Maintaining your TurboClean™ / PowerForce™ Pet XL Cleaning & maintaining your machine regularly can help prevent most issues & ensures the best cleaning performance out... Answer ID: 7049
  4. Updated   If you are experiencing leaking issues, follow the steps below to resolve:   This machine is gravity fed, pulling the trigger while the clean water tank has solution in it and the machine... Answer ID: 7043
  5. Updated   If you are experiencing brush roll issues, follow the steps below to resolve:   Brush roll not turning could be due to a broken belt or a seized brush roll Turn OFF & unplug... Answer ID: 6985
  6. Updated   If you are experiencing spray issues, follow the steps below to resolve:   Cleaning spray tips Turn machine OFF & unplug Remove clean water tank Remove dirty tank     Place... Answer ID: 7013
  7. Updated   If you are experiencing suction issues, follow the steps below to resolve:   Ensure dirty tank is empty Empty dirty tank Float may have been triggered if dirty tank is full This will... Answer ID: 6975
  8. Answer ID: 5100
  9. Updated   If you are experiencing spray issues, follow the steps below to resolve:   Cleaning spray tips Turn machine OFF & unplug Remove clean water tank Remove dirty tank     Place... Answer ID: 7047
  10. Updated   If you are experiencing brush roll issues, follow the steps below to resolve:   Brush roll not turning could be due to a broken belt or a seized brush roll Turn OFF & unplug... Answer ID: 7051