FAQ Search Select a Category BarkBath Cleaning Formulas Cleaning Tips Commercial Products Corporate Deep Cleaners Hard Floor Cleaners Mops, Brooms and Brushes Parts and Accessories Steam Sweepers Vacuums Warranty Web Site and/or go My CleanView® Vacuum's brushes aren't turning. How can I fix this? Answer: Just to be safe, unplug your machine and remove the access plate and check the brush and belt for damage. Clean off any debris on the brush. If brush will not turn by hand, or belt is broken, you’ll need to replace the damaged part(s). To order the belt, click on this link: http://www.bissell.com/parts/?sc=part&partid=4680&cid=ccsocial To order the brush, click on this link: http://www.bissell.com/parts/?sc=part&partid=26885 If the brush is still not turning, please take the machine to a BISSELL Authorized Service Center to have a technician check it. You can locate one by clicking here: http://www.bissell.com/service-centers/. Related Questions Why is my vacuum sounding loud? What should I check? My Momentum® or PowerTrak Cyclonic Vacuum® trips my circuit breaker. What should I do? What does the clean carpet sensor do on my Rewind? My AeroSwift™ Vacuum's belts keep breaking. What should I do?