FAQ Search Select a Category BarkBath Cleaning Formulas Cleaning Tips Commercial Products Corporate Deep Cleaners Hard Floor Cleaners Mops, Brooms and Brushes Parts and Accessories Steam Sweepers Vacuums Warranty Web Site and/or go My Pet Hair Eraser® or Opticlean® Cyclonic Vacuum has no power. What should I do? Answer: Unplug the vacuum and check the entire length of the power cord and the plug to see if it’s damaged. Run the palm of your hand down the entire length of the cord and feel for any edges. The cord should be smooth all the way down. If the cord is damaged, please take your vacuum to a technician. You can find your nearest BISSELL® Authorized Service Center by clicking http://www.bissell.com/support/product-support/service-centers/ or by calling 1-800-237-7691, available 24 hours a day. Make sure cord is plugged in to a working outlet. Try another appliance in the outlet or try a different outlet just to double check. Check the Pre- and Post-Motor Filters for debris. Dirty filters can restrict airflow. If you don’t regularly maintain the filters, the buildup could damage the motor and cause loud noise. If you still have no power, at this point you should take your vacuum to an Authorized Service Center. See the above link to find one near you. Related Questions Why is my vacuum sounding loud? What should I check? Why doesn't my brush rotate anymore? The separator grill is hard to remove on my PowerEdge®. What should I do? My PowerForce® Bagged Vacuum is blowing dust. What can I do?