If you need to replace the edge cleaning brushes on your robot, this video will show you how.

• This task does require a Phillips-head screwdriver, so make sure to have one on hand
• Turn the robot OFF
• Every once and awhile the brushes need to be cleaned to work more efficiently
• Use the screwdriver to remove the screw in the middle of the brush. Pull up on the base of the brush
• When they’re off the robot, you can rinse or soak them in water
• Make sure to let them dry completely before you put them back on the robot
• To reinstall, push the brushes directly into the holder
• Replace the screws

Once your robot is put back together, you can let it get back to work.