The Easy Clean Storage Tray helps you both clean and store your CrossWave.
- To clean your machine, place it onto the storage tray.
- Pour water into the storage tray, filling up to the link showing the maximum amount of water allowed.
- Turn on your machine by pressing the Hard Floor button.
- Recline your machine backwards while in the storage tray. Let the machine run for 10 to 15 seconds until all the water is picked up.
- Then unplug the cord from the outlet.
- If any moisture is left over in the tray from cleaning, wipe it dry with a paper towel or cloth.
- Remove the brush roll window by grabbing the front and pulling up.
- Put the brush roll upright onto the Brush Roll Drying Tray to let it dry.
- To reinsert the brush roll, please reference our Cleaning Brush Roll Video.
- Then lock the pull tab into place by pressing downward.
- Reinsert the brush roll window by lining up the tabs with the edges of the foot.
- Push the brush roll window back into place until you hear a click.
- Your CrossWave is now clean and ready to use again.
Great!
We're glad you can get back to cleaning! Should you need any additional support, please review one of the related articles below or head back to support.bissell.com.
