The BISSELL Big Green Carpet Cleaner is quick and easy to use:
- Start by vacuuming the entire area
- Consider Pre-treating any really tough or set in stains
- Pull the top tank handle up and remove the dirty water tank
- Next lift out the clean water tank
- Take the clean water tank to your sink and fill with hot tap water to the water line
- Add two cap fulls of BISSELL solution using the built in measuring cap
- There are many solution choices to fit your cleaning needs
- Next replace the tanks making sure the dirty water tank is fully seated on top of the clean water tank, then you're ready to clean
- Start the machine and recline the handle
- Press the trigger and make one slow forward and backward pass over the area
- Release the trigger and make one slow forward and backward pass over the same area to suction up any additional dirty water from the carpet
- Repeat wet and dry passes overlapping by 3-4 inches
- The flow indicator on the machine stops spinning to let you know when you need more water and solution
- Empty the dirty water tank and refill the clean water tank with additional water and solution if you have more cleaning to do
- When you are completely finished cleaning unplug the machine and remove and rinse both the clean and dirty water tanks
- Check the brush roll on the bottom of the machine for dirt and debris and remove as needed
- Put the tanks back on the machine
Great!
We're glad you can get back to cleaning! Should you need any additional support, please review one of the related articles below or head back to support.bissell.com.
