We'll show you how to bathe your dog using the BarkBath:
- Place the base unit on the microfiber mat on the floor of the area where you'll be bathing your dog
- If your dog has thick or long hair use a screwdriver to remove the screw from the plate of the fading tool to expose longer nozzles
- Plug the unit into a grounded outlet, and press the power switch to the on position
- Set the rinse or shampoo switch to the desired setting
- For rinse the machine will only dispense water
- For shampoo the tank will dispense a mixture of shampoo and water
- Prime the system by pointing the nozzle at the microfiber mat and pressing and holding the spray trigger for 15 to 20 seconds to allow solution to dispense
- Press and hold the spray trigger while gently stroking the nozzle of the bathing tools downwards following the dog's coat
- It is important to know that the suction is always on
- Release the spray trigger, and use drying strokes to suction up moisture from the dog's coat
- To clean more delicate areas of your pet such as the face and paws spray the shampoo and water mixture on the microfiber towel and hand clean as needed
- If your dog still has a strong odor clean again or contact a professional
- Hope this video gives you a better idea on how to clean your pet
Great!
We're glad you can get back to cleaning! Should you need any additional support, please review one of the related articles below or head back to support.bissell.com.
