Since the TurboBrush ® is air-driven, a lack of suction may be the reason why it’s not spinning correctly (if there is not a problem with the TurboBrush itself).
- First, make sure the selection knob is turned to “Tools.”
- Then, check the tank-lid for clogs and clean as needed.
- Next, rinse the TurboBrush under warm water and remove any debris from brush & nozzle.
- Finally, suction warm water from a sink to flush out the TurboBrush lines.
Still need help? Please call us at 1-800-237-7691, Monday - Friday 8 a.m. to 10 p.m., Saturday 9 a.m. to 8 p.m., or Sunday 10 a.m. to 7 p.m. ET. A representative will be ready and waiting to help you out!