FAQ Search Select a Category BarkBath Cleaning Formulas Cleaning Tips Commercial Products Corporate Deep Cleaners Hard Floor Cleaners Mops, Brooms and Brushes Parts and Accessories Steam Sweepers Vacuums Warranty Web Site and/or go How do I remove and replace the latch on my CleanAlong® ? Answer: Using a flat head screwdriver, gently wedge the tip of the screwdriver along the side of the old latch. Push inwards with the screwdriver to pop the latch out of its hole on one side. Remove the old latch and discard. With the new latch, gently line-up one side of the latch in the corresponding hole on the unit. Make sure the spring in the center of the latch is also lined up. Use the flathead screwdriver to gently push remaining side into remaining hole on the unit. Move latch back & forth to confirm it moves freely & springs back into place. Confirm the door of the unit will lock close. Latch installation is now complete. Related Questions Why is my vacuum sounding loud? What should I check? Where can I get a replacement brush and brush belt for my BISSELL Go Vac? Why doesn't the power cord rewind fully on my Pet Hair Eraser® or Opticlean® Cyclonic Vacuum? My Powergroom® Pet Canister Vacuum power cord does not rewind fully. What should I do?