FAQ Search Select a Category BarkBath Cleaning Formulas Cleaning Tips Commercial Products Corporate Deep Cleaners Hard Floor Cleaners Mops, Brooms and Brushes Parts and Accessories Steam Sweepers Vacuums Warranty Web Site and/or go My PowerGroom® Helix Rewind belt continually breaks. What should I do? Answer: First, check your height setting. A height setting too low will cause friction between the brush and the flooring, which can put a lot of stress on the belt, causing it to break. Adjust the setting using the dial in the middle of the vacuum’s base. Keep in mind that belts break over the course of the normal use of your vacuum. They will need to be replaced periodically. Beware of knock-offs! The only way to be sure to get a quality BISSELL® vacuum belt is by going to our website. You can order one by clicking here: http://www.bissell.com/replacement-belt-for-upright-vacuums-2031093?productid=6594 Related Questions Why is my vacuum sounding loud? What should I check? Where can I get a replacement brush and brush belt for my BISSELL Go Vac? Why doesn't the power cord rewind fully on my Pet Hair Eraser® or Opticlean® Cyclonic Vacuum? My Momentum® or PowerTrak Cyclonic Vacuum® trips my circuit breaker. What should I do?