Use the following step if your Proheat 2X® Revolution™ is leaking:
If your machine is leaking from the Water/Formula Tank:
NOTE: If water/formula was spilled when filling the tank ,the liquid could have collected in the Carry Handle area and leaked down the front/sides of the tank.
NOTE: Liquid may accumulate behind the colored band around the top of the tank and leak down. Wiping this area thoroughly will resolve this.
- Fill the clean water tank and check for cracks or damage. If cracks or damage is found, a new tank needs to be ordered.
If your machine is leaking from the Dirty Water Tank:
- Empty the tank and flip it over. The arrow on the inner stack collar needs to be aligned to the arrow on the tank bottom.
- Once the arrows are aligned, fill the tank with clean water through the rubber opening on top of the tank and check for cracks or damage. If cracks or damage is found a new tank needs to be ordered.
If your machine continues to leak, please contact us. A representative will be happy to assist you.