We’re sorry there is a leak with your machine. Please check out our easy tips for repair.
-Check the 2 small o-rings on the fitted end of the hose solution line also.
-Make sure the hose solution line is firmly locked into place; after firmly inserting the connection; turn to the right until it snaps into place.
Leaking Between Wand Pieces?
-Make sure the o-rings on wand sections are in place, and the wand sections are firmly pressed together.
Leaking from Bottom of the Tank?
-The red colored gasket must be on the bottom of tank. Check out the photo.
-Make sure to check the X-valve. If it’s stuck inward, press to release.
-Please tighten the cap too.
-Check both tanks for any leaks.
-If all above steps check out, please contact one of our Authorized Service Centers for repair. Here is the link to find a location near you. http://canada.bissell.com/support/product-support/service-centers