FAQ Search Select a Category BarkBath Cleaning Formulas Cleaning Tips Commercial Products Corporate Deep Cleaners Hard Floor Cleaners Mops, Brooms and Brushes Parts and Accessories Steam Sweepers Vacuums Warranty Web Site and/or go My Powergroom® Pet Compact is tripping circuit breakers. What should I do? Answer: First check all filters on the vacuum to make sure they are clean and no debris has built up. This can make the motor overheat and thereby “trip” a breaker. Unplug the cord and check the length of the cord for damage. If the cord is damaged, please take your vacuum to a technician. You can find your nearest BISSELL® Authorized Service Center by clicking http://www.bissell.com/support/product-support/service-centers/ or by calling 1-800-237-7691, available 24 hours a day. Is the machine plugged into an extension cord? If so, try unplugging the extension cord and try the machine in another outlet. Check the amp limit of circuit breakers. If you’re using a 12 amp machine and the circuit breakers are 10 amps and already overloaded, the circuit may keep “tripping” if additional appliances are plugged into the same circuit. If nothing else is plugged into the circuit, there is a good chance it will not “trip.” Related Questions Why is my vacuum sounding loud? What should I check? Where can I get a replacement brush and brush belt for my BISSELL Go Vac? Why doesn't the power cord rewind fully on my Pet Hair Eraser® or Opticlean® Cyclonic Vacuum? My Powergroom® Pet Canister Vacuum power cord does not rewind fully. What should I do?