FAQ Search Select a Category BarkBath Cleaning Formulas Cleaning Tips Commercial Products Corporate Deep Cleaners Hard Floor Cleaners Mops, Brooms and Brushes Parts and Accessories Steam Sweepers Vacuums Warranty Web Site and/or go The clean filter indicator is on on my Pet Hair Eraser® or Opticlean® Cyclonic Vacuum. What should I do? Answer: First, make sure the bag isn’t full. Check the pre- and post-motor filters for debris. The pre-motor filter is washable in warm water with mild detergent. The post-motor filter is not washable. Does the “change bag” indicator remain orange with the hose removed? If the “change bag” indicator is orange with the hose attached, but turns off when the hose is removed, the hose may have a clog. Work the clog loose by massaging the clogged area and/or gently twisting the hose where it’s clogged until the clog works itself free. If the change bag indicator remains lit, please take your vacuum to a technician. You can find your nearest BISSELL® Authorized Service Center by clicking http://www.bissell.com/service-centers/ or by calling 1-800-237-7691, available 24 hours a day. Related Questions Why is my vacuum sounding loud? What should I check? Why doesn't my brush rotate anymore? The separator grill is hard to remove on my PowerEdge®. What should I do? My PowerForce® Bagged Vacuum is blowing dust. What can I do?