FAQ Search Select a Category BarkBath Cleaning Formulas Cleaning Tips Commercial Products Corporate Deep Cleaners Hard Floor Cleaners Mops, Brooms and Brushes Parts and Accessories Steam Sweepers Vacuums Warranty Web Site and/or go My Pet Hair Eraser® or Opticlean® Cyclonic Vacuum is blowing dust. What should I do? Answer: First, make sure the dirt container isn’t full. Make sure the filters are installed correctly. There’s only one way each filter can go into the machine. Make sure the filters are clean. The pre-motor filter is washable in warm water with mild detergent (make sure it’s completely dry before replacing), the post-motor filter isn’t washable. You can replace the filter by clicking here: http://www.bissell.com/parts/?sc=part&productid=2924&partid=7336 Make sure there are no clogs in the hose. If the hose is clogged, work the clog loose by massaging the clogged area and/or gently twisting the hose where it’s clogged until the clog works itself free. Also, check the hose for cracks or holes. Make sure the hose is securely attached to the suction opening. If the vacuum is still blowing dust, please take it to a technician. You can find your nearest BISSELL® Authorized Service Center by clicking http://www.bissell.com/support/product-support/service-centers/ or by calling 1-800-237-7691, available 24 hours a day. Related Questions Why is my vacuum sounding loud? What should I check? Why doesn't my brush rotate anymore? The separator grill is hard to remove on my PowerEdge®. What should I do? My PowerForce® Bagged Vacuum is blowing dust. What can I do?