FAQ Search Select a Category BarkBath Cleaning Formulas Cleaning Tips Commercial Products Corporate Deep Cleaners Hard Floor Cleaners Mops, Brooms and Brushes Parts and Accessories Steam Sweepers Vacuums Warranty Web Site and/or go My Total Floors® Wet and Dry or PowerEase® Wet and Dry has no power. What should I do? Answer: Unplug the cleaner and check the entire length of the power cord and the plug to see if it’s damaged. Run the palm of your hand down the entire length of the cord and feel for any edges. The cord should be smooth all the way down. If the cord is damaged, please take your mop to a technician. You can find your nearest BISSELL® Authorized Service Center by clicking http://www.bissell.com/support/product-support/service-centers/ or by calling 1-800-237-7691, available 24 hours a day. Make sure the cord is plugged in to a working outlet. Try another appliance in the outlet or try a different outlet just to double check. If you still have no power, at this point you should take your mop to an Authorized Service Center. See the above link to find one near you. Related Questions Why is my vacuum sounding loud? What should I check? My Momentum® or PowerTrak Cyclonic Vacuum® trips my circuit breaker. What should I do? What does the clean carpet sensor do on my Rewind? My AeroSwift™ Vacuum's belts keep breaking. What should I do?