The BISSELL CleanView Bagless vacuum contains three filters, which should be cleaned frequently in order to maintain good air flow for strong suction power and reduce loudness. The three filters are the round filter, located above the dirt cup, the square filter located in the tray beneath the dirt cup and the rectangular filter located on the side or back of the machine. These filters should be cleaned or replaced often. The black filters can be washed in warm water and mild detergent and should be completely dry prior to re-installing. Additional filters can be ordered through Consumer Services. This bagless vacuum is a clean-air system, where all the suction occurs through the hose. Check the hose for possible clogs by removing the hose completely from the back of the machine by the two screws. Using a broom stick handle, push any dirt or debris through the hose. Reduced air flow can put additional stress on your motor, causing a change in it's sound. If cleaning the filters and hoses do not reduce the motor noise, please take your machine to a BISSELL Authorized Service Center. BISSELL provides a one year warranty on any manufacturer defects.
To locate your nearest BISSELL Authorized Service Center, go to the BISSELL Homepage at: http://canada.bissell.com. Select the Customer Support tab at the top of the home page and enter your zip code in the Service Center search box. You can also locate a Service Center by phone, 24 hours a day, by calling 1-800-237-7691 and choosing option #1. Consumer Services Representatives are also available to assist you by phone. Please call 1-800-237-7691, Monday - Friday 8 a.m. to 10 p.m., or Saturday 9 a.m. to 8 p.m., ET.