1. First, check the dirt bin and the post-motor filter for debris. Dirty filters can restrict airflow. If you don’t regularly maintain the filter, the buildup could damage the motor and cause loud noise. Also check the upper-tank air & dirt ramps, as they may need to be rinsed.
2. A clogged hose may also cause the unit to sound strange. Here’s how to unclog the hoses:
a) To clear the main upholstery hose:
First, detach the hose from the vacuum. Push a broomstick into the hose to push any obstruction to the curved end of the hose where it can be removed.
Note: A coat hanger is not recommended to clear a clog as it may damage the hose.
b) To clear the lower hose:
The lower hose can be found next to the right hand wheel. Remove the screw from the left side of the lower hose on back of the vacuum and straighten this section of hose by pulling it down or lay the vacuum out flat (you’ll need to push the handle release pedal twice) and roll it on its side with the lower hose towards the top side. Remove the hard plastic hose wand base (held up by a single screw) to expose the lower hose. Look through the hose for obstructions. Push a broomstick through lower hose to unclog. The access plate (the black plastic plate over the brush roll) can also be removed to gain better access to the lower hose. Note: A coat hanger is not recommended to clear a clog as it may damage the hose.
3. Check the brush and belt. Clear off any dirt and debris from the brush. If that doesn’t fix the noise, remove the brush and belt, lay down and turn the vacuum over (so the base of the vacuum is facing up), and turn it on. If this fixes the noise, you’ll need to replace the brush and the belt. You can do so by clicking here:
4. If your vacuum is still too loud, please take it to a technician. You can find your nearest BISSELL® Authorized Service Center by clicking http://www.bissell.com/support/product-support/service-centers/ or by calling 1-800-237-7691, available 24 hours a day.