FAQ Search Select a Category BarkBath Cleaning Formulas Cleaning Tips Commercial Products Corporate Deep Cleaners Hard Floor Cleaners Mops, Brooms and Brushes Parts and Accessories Steam Sweepers Vacuums Warranty Web Site and/or go How do I use the SteamBoost™ Disposable Pads on my Symphony™? Answer: Attach the SteamBOOST Pad. Step on the foot release for mop pad tray and lift unit off tray. Open the tray by lifting up the release tab: Undo the flaps on the pad. Place opened tray on pad. Wrap pad around the bottom of the tray, making sure the ends of the pad are folded on top of the tray: Close the tray by folding down, snapping into place over the pad: Put the SteamBOOST pad tray back down on the floor and set the unit back on top. It will click into place: Fill the water tank. On the back of the machine, open the easy fill opening of the water tank and use the included water cup to fill the water tank with water. Don't overfill or water may spill from the tank. For best results, water should be at room temperature. Close the Easy Fill opening. The water tank holds 13oz and will last approximately 15 minutes depending on the amount of the steam used during cleaning. Pull and twist the Quick Release cord wrap clockwise to unwrap the power cord completely and plug into an outlet. Adjust the handle for your most comfortable cleaning height by pressing the tab at the base of the handle with one hand and pulling the handle up with the other hand. Once you are done mopping with the SteamBOOST pads, throw away after use. Do not flush. Related Questions How do I use my Steam Mop to sanitize my floor? My Steam Shot™ is spraying water only or steam and water. What should I do? Why doesn't my machine heat up? The mop pads will not stay on my Lift-Off ® Steam Mop foot. What can I do?