FAQ Search Select a Category BarkBath Cleaning Formulas Cleaning Tips Commercial Products Corporate Deep Cleaners Hard Floor Cleaners Mops, Brooms and Brushes Parts and Accessories Steam Sweepers Vacuums Warranty Web Site and/or go My Total Floors® Wet and Dry or PowerEase® Wet and Dry is difficult to push. What should I do? Answer: Make sure you release enough water to get the pad or brush wet and to get the floor wet. The machine won’t move easily over the floor on the wet side unless water is being released. Also, make sure that when the handle is reclined to use the wet side, the brush or pad is lowering down onto the floor. This can be checked by looking at the foot of the machine from the side and then reclining the handle. You should be able to see the brush or pad lowering down. If it doesn’t, the unit will not move easily over the floor. If this is the case, please take your cleaner to a technician. You can find your nearest BISSELL® Authorized Service Center by clicking http://www.bissell.com/support/product-support/service-centers/ or by calling 1-800-237-7691, available 24 hours a day. Related Questions Why is my vacuum sounding loud? What should I check? Where can I get a replacement brush and brush belt for my BISSELL Go Vac? Why doesn't the power cord rewind fully on my Pet Hair Eraser® or Opticlean® Cyclonic Vacuum? My Momentum® or PowerTrak Cyclonic Vacuum® trips my circuit breaker. What should I do?