FAQ Search Select a Category BarkBath Cleaning Formulas Cleaning Tips Commercial Products Corporate Deep Cleaners Hard Floor Cleaners Mops, Brooms and Brushes Parts and Accessories Steam Sweepers Vacuums Warranty Web Site and/or go My Pet Hair Eraser Cordless Hand Vacuum is blowing dust. What should I do? Answer: First, see if the dirt container is full. If it is, empty it. Check that the filter isn’t missing and is installed correctly in the dirt cup. Also, check that the filter is clean. You can rinse it with warm water and mild detergent if simply tapping it against a garbage can doesn’t do the trick. Allow the filter to dry completely before reinstalling. If the filter is missing, damaged, or worn out, you can replace it by clicking here:http://www.bissell.com/replacement-filters-2-pack-for-stick-and-hand-vacuums-52h6?productid=94V5 Is the dirt container latched securely? If not, remove the dirt container and reinstall it. You’ll hear an audible “click” when it locks into place on the hand vac body. If your vacuum is still blowing dust, please take your vacuum to a technician. You can find your nearest BISSELL® Authorized Service Center by clicking http://www.bissell.com/support/product-support/service-centers/ or by calling 800-237-7691, available 24 hours a day. Related Questions Why is my vacuum sounding loud? What should I check? Where can I get a replacement brush and brush belt for my BISSELL Go Vac? Why doesn't the power cord rewind fully on my Pet Hair Eraser® or Opticlean® Cyclonic Vacuum? My Powergroom® Pet Canister Vacuum power cord does not rewind fully. What should I do?