Understand your remote before using your vacuum
- The Up Arrow will move the vacuum forward with the unit on and will stop when the bumper encounters any obstacle.
- The left and right arrows turn the unit. Holding the button will turn the unit continuously
- The Stop button will stop the unit immediately
- The backwards button will move your unit backwards for 20cm. However, the unit does not have the anti-cliff back sensor to prevent it from falling from stairs when moving backwards
- There are three buttons to adjust the suction level
- The brush icon buttons will activate High suction, Low suction, and no suction
- The auto button will set the unit in auto clean mode
- Set the unit in spiral single mode to move in a spiral pattern unless an obstacle or stairs is encountered. The unit will continue to operate in AUTO mode with maximum working time until battery is low.
- Select random single mode the operate on a random setting until battery is low
- Set the unit in along the wall mode to have your unit clean along walls until battery is low
- The max button will provide maximum working time with the docking function
- The numbered buttons will provide 60, 45, and 30 minutes working times with the docking function
- The docking button will make the unit search for docking station to recharge
- Grab the virtual wall and press firmly while sliding downward to remove the battery cover
- Insert batteries with the +/- terminals facing the directions indicated and replace the battery cover
- Slide the power switch on the virtual wall and you will see the red light flash to indicate the power is on.
- Place the virtual wall in the threshold of a room or in front of an area of the room you do not want the robot to clean.
- Press and hold in tab on the battery tray and pull outward with the tray to remove
- Remove old battery from the tray and replace with a new battery
Replace the battery tray in to the remote
Great!
We're glad you can get back to cleaning! Should you need any additional support, please review one of the related articles below or head back to support.bissell.com.
