After repeated use, dirt and dust may accumulate on the SmartClean Robotic Vacuum.
- To ensure the best efficiency it’s important to periodically clean your unit.
- Be sure the power switch is turned off.
- Turn the unit over on a flat surface to clean out the intake area, brush roll, and side brushes.
- First, remove the brush roll cover.
- Then, remove the brush roll from the unit by pushing to the left and lifting the brush roll out of the unit.
- Clear any dirt of debris from the brush roll or the intake area of the unit.
- Remove the side brushes by holding the bristles and pulling up.
- The side bristles should be cleaned with water, if they become crooked you can soak them in hot water.
- Once the side bristles are dry, reinstall them on the unit.
- Place the brush roll back in the unit by inserting the left side first and pushing the brush roll in. Once secure the brush roll will slide in to place.
- Place the top cover over the brush roll.
You can purchase replacement parts on Bissell.com
Great!
We're glad you can get back to cleaning! Should you need any additional support, please review one of the related articles below or head back to support.bissell.com.
