The following simple steps will ensure a long life for your BISSELL ProHeat 2X:
- Flush the system by setting the Custom Clean knob to the "Rinse" Setting
- Turn on the machine
- While holding down the trigger make one forward and reverse wet pass
- Release the trigger and make another forward and reverse pass
- Reset the dial to 'tools', then clean the hose by suctioning clean water from a container
- Before replacing the hose, lift and stretch it to make sure no liquid remains
- Any attachments that need cleaning can be removed and rinsed, then dried and replaced in the tool caddy
- Your system is now clean and flushed!
- Rinse your water tank with hot water, taking care to clean all around the pouch
- Clean the top half of the tank through the nozzle area
- Pop out the red filter and rinse that as well
- Replace it before putting the tank back together
- Before putting the tank back on, remove the floor nozzle and rinse it out at the faucet
- Pull off and throw away any loose hair or debris that have attached to the brush rolls
- The inside of the end caps can be wiped clean or removed and rinsed clean
- Replace the nozzle on the machine by hooking the tabs into the holes on the bottom then securing it with the screw
- Your machine is now ready to store until your next use
For additional maintenance and care questions please consult your users guide
Great!
We're glad you can get back to cleaning! Should you need any additional support, please review one of the related articles below or head back to support.bissell.com.
