Using the Cleanshot feature on your Proheat 2X Revolution Pet Pro is easy, we'll show you how:
- To use the Cleanshot feature your machine should be plugged into a grounded outlet and powered on
- Recline your machine for use by pressing the recline pedal with your foot
- To use Cleanshot press the Cleanshot button with your foot
- You will know Cleanshot is activated when the window on the button is green and shows an 'I' symbol
- Completely cover the stain with Cleanshot spray
- The spray will continue until it is turned off
- Turn off the Cleanshot spray by pressing the Cleanshot button with your foot
- When Cleanshot is off the window on the button will be red and showing 'O' symbol
- Once Cleanshot is turned off pass over the stain two or three times to remove the stain
- If your Cleanshot isn't spraying here are a few things to check
- First, make sure the clean water tank is full
- Once full make sure the clean water tank is seated properly
- The machine must be reclined for the Cleanshot to spray
- To recline the machine press the recline pedal with your foot and bring the handle downwards
- Another reason your Cleanshot won't spray is if the pump lost it's prime
- With the Machine off and unplugged remove the nozzle and brushroll cover
- Place a ballpoint pen in the black cylinder next to the screw
- When water bubbles pop up remove the pen
- Reassemble the nozzle before cleaning again
- If your Cleanshot continues to spray when the machine is off make sure the Cleanshot button is in the off position
- Press the button to turn Cleanshot off
- You will know it is off when the window on the button shows red and an 'O' symbol
- Now you're ready to get back to cleaning with your Revolution Pet Pro
Great!
We're glad you can get back to cleaning! Should you need any additional support, please review one of the related articles below or head back to support.bissell.com.
