If you are experiencing weak or no spray from your hose and tool on your ProHeat 2X Revolution Pet Pro, here are a few tips that may help:
- First, check to make sure the hose is tightly attached to the machine
- Press on the base of the hose to ensure it is secured
- Also, check to make sure the tool you're using is tightly attached to the hose
- If you are experiencing low or absence of spray from the hose your hose may not be primed or may have lost Prime
- First, turn your machine off and unplug it
- Next, remove the nozzle from the foot
- To do this, scoop and grip the accessory hose door and pull up on the nozzle until it releases
- Place a ballpoint pen in the black cylinders next to the screw
- When water bubbles up remove the pen
- Now put the nozzle and hose back into place
- Hold the end of the hose below the water level in the tank to prime
- With a full tank of water and the Machine off and reclined press the clean shot button 'on'
- Wait for the clean shot to run for a few seconds, this will reprime your machine
- Your hose and tool also won't spray if the clean water tank is empty
- If you notice your clean tank is running low or is empty you will need to refill it to continue cleaning
- If you've refilled your clean water tank, be sure the tank is put back correctly
- If the tank is not secured this could also lead to weak or no spray coming from the hose of the machine
- Now you're ready to get back to cleaning with your Revolution Pet Pro
Great!
We're glad you can get back to cleaning! Should you need any additional support, please review one of the related articles below or head back to support.bissell.com.
