To clean with your Proheat 2x Revolution Pet Pro you will need a full clean water tank with the proper amount of BISSELL cleaning formula :
- First, make sure your machine is off and unplugged
- Next, remove your empty clean water tank by pulling straight up while gripping the handle and unscrew the cap
- Fill your empty water tank with hot tap water to the fill line
- If you are planning to use Express clean mode there is a fill line in the middle of the tank
- This is a precaution to help prevent waste
- You can certainly fill to the deep clean fill lines if you're cleaning areas are quite large
- If you are planning to use deep clean mode there is a fill line at the top of the tank
- If you are using antibacterial formula with easy fill twist the cap back on to the tank and to fill the easy fill formula to the easy fill line on the tank
- To put the full tank back into place line it up with the groove at the bottom of the upper handle
Now you're ready to get back to cleaning with your Revolution Pet Pro
Great!
We're glad you can get back to cleaning! Should you need any additional support, please review one of the related articles below or head back to support.bissell.com.
