Cleaning the nozzle and brush rolls on your Proheat 2x Revolution Pet Pro is easy, we'll show you how:
- To clean the nozzle, start by turning off and unplugging the machine
- To remove the nozzle, pull up on the accessory hose door located on the top of the foot
- To remove the brushroll cover, press the two release buttons and lift straight up
- You can rinse the nozzle under water and insert the nozzle clean-out tool to free up any hair or debris
- Now rinse the brushroll cover and set it aside to dry
- With the comb end of the nozzle clean-out tool brush out any debris or hair from the brush rolls
- When the brushroll is clean and your nozzle and brush cover are dry put the brush roll cover correctly into place by pushing it straight down until you hear a click from both push buttons
- Now you can put the clean nozzle back into place
- Line up the nozzle with the edge near the floor and rotate it back to snap it into place
- Now your Revolution Pet Pro should be correctly assembled and ready to tackle your next cleaning challenge
Great!
We're glad you can get back to cleaning! Should you need any additional support, please review one of the related articles below or head back to support.bissell.com.
