Before storing your Proheat 2x Revolution Pet Pro you'll want to be sure to empty and clean your dirty water tank and allow for it to dry before placing it back in your machine:
- To start, first make sure your machine is off and unplugged
- Next, remove your dirty water tank by pressing down on the colored tank handle
- To empty the tank pull up on the rubber tab and pour out the dirty water
- Fill the dirty tank with clean water and shake gently to rinse the inside
- Empty the dirty water from the tank
- Repeat this process until the tank is dry
- Set the tank aside to dry
- Once the tank is dry make sure the rubber plug on the top is pressed in place
- Press firmly on all edges of the tab to secure it
- Place the tank back into the machine by tilting towards you and inserting the bottom of the tank first
- Then, tilt the top of the tank towards the machine until it clicks into place
- Now your Revolution Put Pro is ready to store until next time
Great!
We're glad you can get back to cleaning! Should you need any additional support, please review one of the related articles below or head back to support.bissell.com.
