For best performance it's important to maintain your machine :
- Once finished cleaning you'll want to flush out your machine
- To flush out your machine fill the tank with warm tap water and then empty it all to rinse
- Fill the tank with warm water again, twist the cap back on tightly, and return the tank to the machine
- Turn the machine on and press the trigger for 15 seconds while making back and forth passes on a section of the carpet
- Finally, release the trigger and suck up the water
- This will help keep your machine clean for future use
- Before storing the machine, clean out your dirty water tank
- Be sure your machine is off and unplug from the outlet
- Remove the dirty water tank by pulling out and away from the machine
- Empty the dirty water tank
- Rinse out your dirty water tank
- Once the tank is clean remove the float stack from the inside of the tank
- Wipe and remove dirt and debris and rinse under warm water
- Once finished pull down the loose piece of the float and line up the arrows before inserting the stack back into the dirty tank
- Secure with the plastic ring and return to the machine
- Wipe the exterior of the machine with a cloth
- Be sure your machine is off and unplugged from the outlet
- Lay the machine down on its back and take the nozzle off the foot of the machine
- Clean off any dirt and debris from your brush roll using the included comb
- This will help keep your machine clean and ready for future use
Great!
We're glad you can get back to cleaning! Should you need any additional support, please review one of the related articles below or head back to support.bissell.com.
