Model No 1608860

Pre-Motor Filters Pet Hair Eraser Vacuum - Foam & Felt

$5.49

This part works with 4 products. View Products

How to clean the Foam & Felt Pre-Motor Filters for the Pet Hair Eraser Upright Vacuum - Model 1650 Series. Press the Tank Release Button and pull the tank away from the vacuum. Pull tab out on the front of the dirt container and pull handle up to open filter location. Remove pre-motor filters from the top of the dirt container lid by pulling them out. Both Pre-Motor Felt/Mesh and Foam Filters are washable. Clean with a mild detergent, rinse and squeeze all excess water. Allow filters to dry completely before reinserting. Place dry pre-motor filters back in the top of the dirt container placing the thick foam filter last. Filters should be replaced with new filters every 6 to 8 months depending on use and how frequently they are cleaned.

This part works with 4 products. View Products

Product Specs & Support
Name Pre-Motor Filters Pet Hair Eraser Vacuum - Foam & Felt
Model No 1608860
Quantity 1
Weight 0.0100