If you encounter a clog in your PowerLifter bagged, here are some steps to fix it.
- You will need a Phillips screwdriver.
- Make sure your machine is turned off and unplugged from the outlet.
- Remove the hose from the back of the vacuum by twisting it to the left. Remove any debris that may have gotten clogged using a broomstick.
- Lay the machine back to expose the brush roll.
- Remove each screw and lift off the bottom cover.
- Check the air passageway for any debris.
- Then check the foot hose on the back of the machine towards the bottom.
- You can straighten the hose by pressing the recline pedal down until the foot releases
- If there is a clog, you can remove it with a broomstick
- Replace the bottom cover when finished.
These few steps should help clear clogs in your PowerLifter Bagged vacuum.
Great!
We're glad you can get back to cleaning! Should you need any additional support, please review one of the related articles below or head back to support.bissell.com.
