Let’s get your Powerlifter Bagged vacuum assembled!
- All you will need is a Phillips screwdriver.
- Place the upper handle onto the base and push down.
- Then, attached the handle with the 2 screws that are taped to the handle in a plastic bag.
- Wrap the power cord around the cord release clips, then secure the end of the plug to the cord.
- For a fresh scent when cleaning, locate the Febreze scent tag at the bottom of the vacuum bag.
- Carefully pull the tab along the perforated lines in the center of the scent tag.
- To insert a new bag, grab the collar and press it onto the connector tube. Tuck the bag into the bag compartment. Now you can close the bag door until it clicks.
- Next, insert the end of the hose into the back of the vacuum and twist to lock it into place.
- Wrap the hose through the hose clip. Then connect the hose wand to the foot hose, located at the bottom of the vacuum.
- Place your accessory tools on the vacuum. The pet hair eraser tool does not store on the vacuum.
You are now ready to clean with your Powerlifter Bagged vacuum!
Great!
We're glad you can get back to cleaning! Should you need any additional support, please review one of the related articles below or head back to support.bissell.com.
