Maintaining the brush roll and belt on your PowerGlide® Pet is easy, we’ll show you how
- Be sure to turn off and unplug your vacuum before doing any maintenance
- To access the belt and brush roll you’ll need a Phillips head screwdriver
- Next, gently lay the vacuum front side down
- Now, unscrew the 7 screws to remove the bottom cover
- Pull the brush roll straight out and slide the belt off the motor gear
- Inspect the brush roll by placing it on its end and spinning. It should spin freely with one flick. If it doesn’t replace the brush roll.
- Now inspect the belt, if it appears damaged it should be replaced
- Next, put the belt back on the brush roll
- Pinch the belt around the brush roll and hook it around the silver motor gear. Line up the end caps and push inward
- To ensure the belt is working correctly, manually rotate the brushroll once both end caps are inserted
- Re-attach the bottom cover and insert the 7 screws from earlier
- Now, plug in, turn the power and brush switch on, and recline your vacuum
That’s it, you’re ready to get back to cleaning with your PowerGlide® Pet
Great!
We're glad you can get back to cleaning! Should you need any additional support, please review one of the related articles below or head back to support.bissell.com.