Video Transcript:

If your vacuum becomes clogged, the vacuum is equipped with a brush shut off to prevent damage from occurring. If this were to happen, follow these steps to re-set your brush roll.

Turn the vacuum to the off position Turn the brushroll switch to the off position Unplug the vacuum from the electrical outlet
Lay the vacuum down and check for any major clogs in the brush chamber Once the brush roll is free of all debris, return the vacuum to the upright position.

Locate the brush reset button on the lower back right of the vacuum. Press the button to reset the brushroll To ensure the brush has been reset, plug the vacuum back into the electrical outlet. Turn on the vacuum detent the vacuum to begin cleaning Turn the brushroll on. The brush should start to rotate when the vacuum is leaned back and the brushroll is on.