Assembling your PowerGlide/CleanView Lift-Off vacuum is easy, we’ll show you how
- To start, you will need a Phillips head screwdriver
- First, slide the handle into the top of the base
- Now attach the handle with the screw that is taped to the handle
- Next, attach the hose by lining up the tabs on the cuff with the notches on the back of the vacuum. Twist clockwise to lock it into place
- To secure the handle end, push it into the sleeve on the base
- Next, slide the dual crevice tool/extension wand holder onto the back of the base
- Now, slide the Pet Turbo Eraser tool holder onto the back of the base, above the crevice tool holder
- Your Lift-Off includes an optional Febreze filter
- To install this filter, start by removing the tank by pressing the tank release button and pulling it away from the vacuum. Then lift up on the tab attached to the filter cover
- Now remove the black/yellow foam filter and replace it with the Febreze filter. Be sure to place the Febreze filter last, covering the mesh filter
- Place the filter cover and dirt tank back on the base, and you’re done!
Now you’re ready to get cleaning with your Lift-Off vacuum
Great!
We're glad you can get back to cleaning! Should you need any additional support, please review one of the related articles below or head back to support.bissell.com.
