- It is important to remember that you will not always see a lot of steam coming out of your unit as the steam is directed toward the floor
- If you have no steam make sure your unit is turned on and plugged into a working outlet
- Next, make sure there is water in the tank
- Make sure you are using only water as other solutions can damage the unit
- Check your water tank for damage
- Make sure to have water in the tank so you can see any leaks
- Check the water tank cap for damage
- Make sure the rubber gasket at the tip is attached
- Check to see if the foot of your unit is connected properly
- Remove the foot and reconnect it
- The foot of the unit should lock into place with no gaps
- Check that your steam 'ready' light is on
- Remember that it may take up to a minute to heat up
- The light should change from a blinking light to a solid light
- Once the light is solid press the on/off button and select your appropriate steam level
- A light knocking noise is normal while water flows through the pump, this may take up to a minute
- Your unit should then start steaming
Great!
We're glad you can get back to cleaning! Should you need any additional support, please review one of the related articles below or head back to support.bissell.com.
