Let's assemble your PowerForce Helix Turbo Rewind Vacuum!

You will need a Phillips screwdriver.

• Place the upper handle into the body and push down.
• Remove the two screws in the plastic bag, then secure them into the handle with your screwdriver.
• Insert the lower tool holder and turn it to the left to lock it into place.
• Next, insert the end of the hose into the back of the machine and twist right to lock it into place.
• Wrap the hose through the hose clip, then connect the hose wand to the foot hose located at the bottom of the vacuum.
• Conveniently store your TurboBrush on the front holder and the rest of your tools on the back of the vacuum.
• Your vacuum includes a Febreze® filter to provide a fresh scent when cleaning.
• To use the Febreze® filter, remove the tank by pressing the tank release button and lifting away from machine.
• Open the dirt container lid by lifting the release latch.
• Remove the filter in the unit and replace it with the Febreze® filter.
• Return the dirt container back onto the vacuum.

Now that your machine is assembled, you can start cleaning!