Shopping Cart
Exclusive Offer for Email Subscribers! Learn More
Get free shipping on any order over $40!Learn More
  • dog Buy BISSELL, Save Pets
  • FREE Shippng FREE Shipping Over $40
  • Pay with PayPal Fast & Easy Checkout
  • ribbon 30-Day Satisfaction Guarantee
  • dog
  • FREE Shippng
Why shop at Bissell.com?
  • Pay with PayPal
  • ribbon

PowerForce® Compact Brushroll Maintenance Video

If you need to perform any maintenance or clean the brush roll, these steps will help.

  • First, make sure the vacuum is unplugged
  • Place the vacuum upside down with the brush roll facing upwards
  • Remove the 5 screws using a Phillips screwdriver
  • Lift off the brush cover and grasp the floor brush at both ends to lift it out. 
  • Clean debris from the brush roll, motor pulley, and drive belt as needed. If the brush roll is worn, replace as needed
  • Test the brushroll by holding one end and spinning. It should spin several revolutions smoothly with one flick. If not, the brushroll will need to be replaced
  • Check the air passageway for any obstructions
  • Separate the hose from the hose wand base to look through the hose for any clogs. You may need to remove debris from this area as well. 
  • When finished cleaning, align the brush roll with the belt by turning by hand several times in the direction of the motor to align the belt on the floor brush
  • Finally, replace the brush cover and 5 screws using a Philips screw driver. 

That’s it! We hope you found these tips useful and you can get back to cleaning.  

Show fewer features
Show more features
Expand
Close
Show All Specs
Hide All Specs
Expand
Close