Let's get your PowerForce Vacuum assembled! All you need is a Phillips screwdriver.
- Place the upper handle onto the base and push down
- Remove the plastic bag from the handle containing the two screws, then secure each screw.
- Wrap the power cord around the cord release clips, then secure the end of the plug to the cord.
- For a fresh scent when cleaning, locate the Febreze® scent tag at the bottom of the vacuum bag.
- Carefully pull the tab along the perforated lines in the center of the scent tag.
- Insert the end of the hose into the back of the vacuum and twist to lock it into place.
- Wrap the hose through the hose clip. then connect the hose wand to the foot hose, located at the bottom of the vacuum.
- Place your accessory tools on the back of the vacuum.
You are now ready to clean with your PowerForce Vacuum.
Great!
We're glad you can get back to cleaning! Should you need any additional support, please review one of the related articles below or head back to support.bissell.com.