If you need to replace the Brush Roll or belt on your Pet Hair Eraser® Turbo, follow these simple steps:
- First, unplug and turn off your vacuum
- Then press the foot to recline the machine and lay it face down with the Brush Roll up
- Use a Philips-head screw driver, to unscrew the 9 screws on the bottom of the base and remove the bottom cover
- Pull the roller straight out and slide the belt off the motor gear
- Inspect the Brush Roll by placing it on its end and letting it spin. It should spin freely, multiple times with one flick. If it doesn’t, the Brush Roll should be replaced
- You should also take this time to inspect the belt. If it seems damaged, you should replace it
- To place the belt back on the brush roll, pinch the belt around the brush roll and hook back around the motor gear
- Rotate the Brush Roll into place and line up the end caps
- Re-attach the cover with the 9 screws
That’s it! You can now get back to cleaning!
Great!
We're glad you can get back to cleaning! Should you need any additional support, please review one of the related articles below or head back to support.bissell.com.