Assembly of your Pet Hair Eraser® Lift-Off® is easy. We’ll show you how! 

• First, slide the handle into the vacuum base and attach the screw that is taped to the handle using a Philips head screwdriver
• Next, attach the hose by lining the tabs on the cuff with the notches on the back of the vacuum. Twist clockwise to lock the hose into place
• Now, push the handle end into the base of the vacuum on the opposite side
• To install the optional Febreze filter, press the tank release button and pull the container away from the vacuum

• You’ll then need to remove the post-motor filter by pulling up on the tab of the filter cover. 

• Unlock the post-motor filter by twisting the tab counter-clockwise
• Finally, remove the post-motor filter and replace with the Febreze filter
• Then place the dusting brush and LED crevice tool on the unit
• Now wrap the power cord around the upper and lower cord wrap

That’s it! Your Pet Hair Eraser® Lift-Off® is now ready to get to work!