Once you’re done cleaning with your JetScrub Pet it needs a little maintenance to keep things running smooth and ensure it’s ready to clean next time.

• First, make sure the machine is turned off and unplugged.
• Empty the Dirty Water Tank by removing it from the machine.
• Grab the tank lid and pull up to remove.
• Remove the filter from the front of the tank lid.
• Pour dirty water down the sink or toilet and toss any debris left in the tank or filter in the trash.
• Rinse the tank, the lid, the float stack, and the filter in warm water.
• Wipe the area where the Dirty Water Tank sits on the machine if it’s dirty.
• Let parts sit out and dry completely before you put the tank assembly back together.
• Once it’s put together, return the tank to the machine by angling the bottom in first, then the top. The tank should click into place. 
• The brush roll and nozzle need to be removed and cleaned as well.
• Grab both sides of the nozzle and pull up.
• Grab the brush roll tab and pull up to remove.
• Use the nozzle clean out tool to remove hair and debris from the nozzle.
• Both can be rinsed under warm water.
• Clean the brush roll chamber with a cloth.
• Let all pieces dry completely. If your machine came with a storage tray you can place them on the tray to dry.
• Take machine off the storage tray. Replace the brush roll by inserting the right side of the brush first. Then lock the tab into place by pressing down.
• Line the nozzle tabs up with the edges of the foot. Rotate back until it clicks into place.

• Once your machine is clean and reassembled, you can easily store it compactly thanks to the collapsible handle.

• Wrap the cord around the cord wraps and your machine will be ready for its next use.