Thank you for purchasing the BISSELL CleanView Vacuum with OnePass Technology!
This vacuum is easy to assemble. The only tool you need is a Phillips-head screwdriver.
First, slide the handle onto the top of the machine base and secure it with the two included screws.
Now the extension wand clip goes into the slot on the back of the vacuum and twists into place.
Then pinch the tabs of the upper cord wrap and push it into the socket above the extension wand clip.
To attach the hose, line up the ribbed cuff with the hole in the back of the vacuum and twist to lock.
Fold the hose over the wrap and then push the other end down into the lower hose.
Now add the tools to the back. The TurboBrush attaches to the back of the handle, the dusting brush fits in the opening below the upper hose wrap and the crevice tool fits into extension wand, which goes in the clip in the middle of the cord.
The assembly is now complete. To start cleaning, just plug it in, push the power button and go!