Operating the CleanView vacuum is easy. We’ll show you how!
- Gently pull the entire cord out of the automatic cord rewind, making sure to stop at the yellow mark on the cord. Do not pull past the red mark.
- Plug the machine into a grounded outlet
- Next, push the Red Power switch on the pedal once to turn the unit on, and again to turn the unit off.
- To recline the unit, press the recline pedal and pull the handle back towards you.
- The dial located on the foot of the vacuum can be adjusted depending on the type of surface you are cleaning.
- For optimal carpet cleaning performance, adjust to the lowest practical setting. If your vacuum is difficult to push, adjust to the next higher setting.
- Use the various tools that come with your machine to clean crevices, upholstery, and hard to reach areas.
- When finished cleaning, turn off your machine and unplug from the outlet
- To use the automatic cord rewind, hold onto the cord and press the automatic cord rewind button until it’s fully retracted.
We hope these tips have familiarized you with your CleanView vacuum!
Great!
We're glad you can get back to cleaning! Should you need any additional support, please review one of the related articles below or head back to support.bissell.com.
