If you need to clean or change the brush roll on your ICONpet Cordless Vacuum, first turn the vacuum off.
- Press the foot release button located at the bottom of the extension wand.
- Set the hand vacuum and extension wand to the side. Flip the foot on its side so the circle with the lock symbols is facing up.
- Use a flathead screwdriver or a coin to twist the lock clockwise.
- It will pop up a little when it unlocks.
- Pull the brush roll out of the foot.
- Remove any visible debris from the brush roll. You can wipe it down with a dry cloth.
- Wipe out foot window
- Slide brush roll back into the side of the foot push and twist counterclockwise into place.
- Return the foot to the vacuum’s extension wand and you’re good to go.
- If your vacuum came with a hard floor brush roll, follow these same steps to install.
Great!
We're glad you can get back to cleaning! Should you need any additional support, please review one of the related articles below or head back to support.bissell.com.