Maintain and care for your BARKBATH™ with these simple steps:
- Turn the power switch off
- Unplug the cord from the outlet
- Remove the dirty water tank
- Empty and rinse the dirty water tank into a sink
- On the tool press the release button and pull the hose straight out
- Remove the shampoo tank and twist open the cap to rinse under running water
- Check the spray nozzle for any debris accumulation
- You may disassemble the spray nozzle for cleaning as needed
- Unscrew to remove the nozzle height selection piece
- Pull off the face plate and mesh plate
- Clear off debris and clean parts as needed
- Once clean, you can replace each part
- Wrap the power cord around the cord wrap on the back of the machine
- Then secure the hose around the base of the unit
- Wipe all surfaces with a soft cloth to make sure all surfaces are dry
- The bathing towel, no rinse shampoo, microfiber towel, and mat can be placed in the storage bag with the BARKBATH™ tool
- Your BARKBATH™ is maintained, stored, and ready for next time
Great!
We're glad you can get back to cleaning! Should you need any additional support, please review one of the related articles below or head back to support.bissell.com.
