Assembling your BARKBATH™ is simple, we'll show you how:
- To start, you will need a Phillips screwdriver
- First, slide the backplate of the Flex hose clip into the opening of the front of the unit
- Take the Flex hose storage bracket and slide the lower plate into the opening found on the back of the unit, then secure the screw
- Wrap the Flex hose around the unit andplace the hose grip into the bracket
- Now, locate the bathing tool and BISSELL No Rinse Dog Shampoo
- Remove the cap from the shampoo tank and add the BISSELL No Rinse Dog Shampoo
- Holding the tool horizontally on a flat surface attached a bathing tool to the cleaner by inserting the Flex hose connector into the shampoo tool connector
- If your dog has a thick or heavy coat you may want to adjust the spray nozzle by using a screwdriver and removing the top faceplate to expose the longer nozzle
- You are now ready to start using your BARKBATH™
Great!
We're glad you can get back to cleaning! Should you need any additional support, please review one of the related articles below or head back to support.bissell.com.
