Exclusive Offer for Email Subscribers! Learn More
Get free shipping on any order over $30!Learn More
Shopping Cart

My CleanAlong® vacuum brush is not rotating. What should I do?

Answer:

1. First, make sure the brush motor is turned on at the hose grip.

2. Check that the handle is reclined. When the handle is locked in the upright position, the brush motor automatically shuts off.

3. Make sure the brush is free of debris. Your vacuum has a feature that will turn it off automatically if an object is lodged in it.

4. See if the brush and belt are intact. Remove the access plate on the foot of the vacuum. Remove the two screws, pull up on the front of the access plate, then pull up on each of the sections of access plate, as shown below. If the belt is broken, you can replace it by clicking here: http://www.bissell.com/belt-2037312

48K2 brush

5. Make sure the brush turns freely by hand. If the brush can’t turn freely by hand, you’ll need to replace it. You can do so by clicking here: http://www.bissell.com/brush-roll-2037311

Please note: make sure the cap is top when re-inserting the brush roll, shown below:

48K2 brush cap - cap must be on top

6. If the brush still won’t turn, please take your vacuum to a technician. You can find your nearest BISSELL® Authorized Service Center by clicking http://www.bissell.com/support/product-support/service-centers or by calling 1-800-237-7691, available 24 hours a day.

Show fewer features
Show more features
Expand
Close
Show All Specs
Hide All Specs
Expand
Close