Exclusive Offer for Email Subscribers! Learn More
Get free shipping on any order over $20!Learn More
Shopping Cart

There is no spray with my Big Green Complete®; how can I get my deep cleaner to spray?


 Check out our easy tips to get your machine to spray again.


Of course; always start with a full tank of water.


-The hose solution line much be connected properly. Check the connection at the front of machine. Firmly insert and twist to the right.

7700 lock hose

-The wet button must be pressed in also

7700 wet button

-Make sure the water tank is seated down properly in the tank. The red colored gasket must be on properly as well as the insert. Check out the photos.

7700 correct gasket

- Is the X-valve dispensing solution? Press while over a sink to see if water comes out.

7700 x valve

 -There are 2 small o-rings on the fitted end of the Hose Solution line; make sure they are there yet.

7700 orings (2)

-By running the unit for 5 minutes with all three buttons powered on. This should dislodge any clogs in the heater. 


If there is still no spray; it would be best to contact a BISSELL Authorized Service Center at this link: 



Show fewer features
Show more features
Show All Specs
Hide All Specs